https://community.hpe.com/t5/disk-enclosures/evaperf-output-controller-field/m-p/4443740#M31563 Hello experts, <BR /><BR />My "evaperf cs -sz EVA2" output as following.<BR /><BR />Time,CPU %,Data %,Ctlr,Serial,Node<BR />21/Jun/2009 01:52:32,0,0,M03A,XXXXXXXXXXM03A,EVA2<BR />21/Jun/2009 01:52:32,1,0,L04H,XXXXXXXXXXL04H,EVA2<BR /><BR />How do I replace M03A as "A", and L04H as "B" ?<BR />How do I define them in fnames.conf, thank you.<BR /><BR /><BR /> Sat, 20 Jun 2009 16:42:01 GMT Matthew_50 2009-06-20T16:42:01Z https://community.hpe.com/t5/disk-enclosures/evaperf-output-controller-field/m-p/4443740#M31563 Hello experts, <BR /><BR />My "evaperf cs -sz EVA2" output as following.<BR /><BR />Time,CPU %,Data %,Ctlr,Serial,Node<BR />21/Jun/2009 01:52:32,0,0,M03A,XXXXXXXXXXM03A,EVA2<BR />21/Jun/2009 01:52:32,1,0,L04H,XXXXXXXXXXL04H,EVA2<BR /><BR />How do I replace M03A as "A", and L04H as "B" ?<BR />How do I define them in fnames.conf, thank you.<BR /><BR /><BR /> Sat, 20 Jun 2009 16:42:01 GMT https://community.hpe.com/t5/disk-enclosures/evaperf-output-controller-field/m-p/4443740#M31563 Matthew_50 2009-06-20T16:42:01Z https://community.hpe.com/t5/disk-enclosures/evaperf-output-controller-field/m-p/4443741#M31564 You can identify them in Command View, click each controller and you'll see the WWID of each one.<BR /><BR />If you want to see the names and not the WWIDs, run:<BR /><BR />evaperf fnh <APPLIANCE> <COMMAND view="" user=""><BR /><BR />Then:<BR /><BR />evaperf fn<BR /><BR />before capturing EVAperf data</COMMAND></APPLIANCE> Sat, 20 Jun 2009 19:34:15 GMT https://community.hpe.com/t5/disk-enclosures/evaperf-output-controller-field/m-p/4443741#M31564 Víctor Cespón 2009-06-20T19:34:15Z