https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449654#M31702 Check this aswelll Tue, 30 Jun 2009 12:48:04 GMT Sivakumar MJ._1 2009-06-30T12:48:04Z https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449650#M31698 <BR /> Hi all,<BR /><BR /> i am new to san we have HP EVA 8000 SAN Storage size is 120 TB and brocade switch and HP server rx 8640 and we use Hp command view to do all task related SAN.can anyone provide me step by step to create zone. Tue, 30 Jun 2009 06:01:18 GMT https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449650#M31698 unixuser 2009-06-30T06:01:18Z https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449651#M31699 You should read the switch manuals and the SAN design guide both available on hp.com.<BR /><BR />In general, you create an alias for the HBA WWN on the switch (web interface), then pack the aliases you want into a zone and add the zone to the current configuration.<BR /><BR />This tasks must be performed directly on the switch, not on commandview. Tue, 30 Jun 2009 06:04:51 GMT https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449651#M31699 Torsten. 2009-06-30T06:04:51Z https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449652#M31700 Hi Check this document... Tue, 30 Jun 2009 12:46:17 GMT https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449652#M31700 Sivakumar MJ._1 2009-06-30T12:46:17Z https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449653#M31701 Hi Check this Tue, 30 Jun 2009 12:46:41 GMT https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449653#M31701 Sivakumar MJ._1 2009-06-30T12:46:41Z https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449654#M31702 Check this aswelll Tue, 30 Jun 2009 12:48:04 GMT https://community.hpe.com/t5/disk-enclosures/how-to-create-zone/m-p/4449654#M31702 Sivakumar MJ._1 2009-06-30T12:48:04Z