topic Re: FCIP (MPX110) setup in Disk Enclosures

FCIP (MPX110) setup

Javier Alonso Muro — Tue, 30 Jun 2009 22:16:40 GMT

Hi!

I have a test enviroment with two MPX110 FCIP gateways that I'm trying to install and configure so that I can get two EVA's to replicate to each other. I've been reading the tiny install guide.

and I follow the guide,but, i got this screen(Attach MPX110.JPG), its Ok?

where can I find a good Guide for this task?.

Thanks in advance.

Re: FCIP (MPX110) setup

Patrick Terlisten — Wed, 01 Jul 2009 06:23:23 GMT

Hello,

there is no screenshot attached to you posting.

Have you setup the switch ports properly, to which the FCIP gateways are connected? The ports should be online as E-Ports. When the ports are online, you need to configure the ip addresses of the GbE ports (local and remote on each side).

Best regards,
Patrick

Re: FCIP (MPX110) setup

Víctor Cespón — Wed, 01 Jul 2009 06:46:08 GMT

User guides for the MPX110:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01634040/c01634040.pdf

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01294692

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01066870

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01295449

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01635114

Re: FCIP (MPX110) setup

Javier Alonso Muro — Wed, 01 Jul 2009 14:33:30 GMT

Sorry, here is the screen

Re: FCIP (MPX110) setup

Patrick Terlisten — Wed, 01 Jul 2009 17:26:55 GMT

Hello,

do you have setup the switch ports as described in the quick start guide? Do you setup the FCIP routes properly?

Best regards,
Patrick