topic evaperf only seeing one EVA in Disk Enclosures

evaperf only seeing one EVA

Houghtpj — Sat, 14 Nov 2009 15:58:33 GMT

Hi,

trying to run evaperf hpc -cont 2 -dur 60 but i'm only getting stats back for ports from 1 of our EVA's. EVA's are set up in differnet sites and are connected throguh fabric if it makes any difference.

any ideas?

Paul

Re: evaperf only seeing one EVA

Houghtpj — Sat, 14 Nov 2009 16:13:41 GMT

sorry to explain a little better. When running evaperf -hps -cont 2 -dur 6 i see stats for the ports on the array at our other sites? I've checked the wwn's between evaperf output and CV and its definatley the other array. if i run other evaperf command i see the correct details. i've check fnames.conf but can't see anything obvious.

thanks

Paul.

Re: evaperf only seeing one EVA

Joseph Salzer_3 — Sat, 14 Nov 2009 18:11:27 GMT

What happens when you do "evaperf ls" do all arrays show up?

How about if you manually specify which arrays you want metrics from by using "-sz"? Does this work?

Hope this helps.

-JS

Re: evaperf only seeing one EVA

Houghtpj — Sun, 15 Nov 2009 10:19:09 GMT

Hi,

If i use the -sz switch nothing is returned. If i run evaperf -vdg -cont 2 -dur 60 -sz array ARRAYNAME i get the correct disk group stats returned for the EVA I'm connected to.

If i use Windows perfmon and look at the port stats again I see the ports on the EVA at our other site. If i connect to the EVA at other site and run evaperf hps i see the correct local port stats.

Re: evaperf only seeing one EVA

Houghtpj — Sun, 15 Nov 2009 10:35:50 GMT

wonder if this is my problem seems very similar. we are on XCS 6110
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01461161