topic Adding new msa20 to existing msa1500 with msa30 in Disk Enclosures

Adding new msa20 to existing msa1500 with msa30

Gordon Bratsberg — Wed, 18 Nov 2009 21:41:26 GMT

I am trying to finding the correct procedure to add a new msa20 to my msa1500cs that is already running a msa30 connected to some vmware esx 3.5 machines.I have a new IO card,new msa20 and cable,just want the proper procedure to hot add the hardware.

Re: Adding new msa20 to existing msa1500 with msa30

IBaltay — Wed, 18 Nov 2009 21:54:20 GMT

Hi,
maybe this could help you:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01298857/c01298857.pdf?jumpid=reg_R1002_USEN

Re: Adding new msa20 to existing msa1500 with msa30

Gordon Bratsberg — Wed, 18 Nov 2009 21:59:55 GMT

Thanks for your help.I have that manual and have read it cover to cover,nowhere in it does it have a procedure for Hot adding a new msa20 or msa30.I originally installed the msa1500 and MSA30 (scsi rack) and set it up,it has been running fine for a year.Now I am wanting to add an additional IO card and MSA20 (sata rack).I would like to know the correct procedure,so I can cause the least effect on my existing MSA30 and vmware machines that are running on it.

Re: Adding new msa20 to existing msa1500 with msa30

Víctor Cespón — Thu, 19 Nov 2009 08:13:32 GMT

I don't know where you have read that you can add new I/O Modules and enclosures with the MSA online.

All the installation guides say to plug and connect everything before powering up.

Re: Adding new msa20 to existing msa1500 with msa30

Gordon Bratsberg — Thu, 19 Nov 2009 14:02:22 GMT

HP support documents state "MSA1500CS and MSA1500I allow hot adding of a new MSA20 enclosure". But I don't know if that means also hot adding of a new IO card.Thats why I'm posting to find out from the experts.Thank you for your input.

Re: Adding new msa20 to existing msa1500 with msa30

Víctor Cespón — Thu, 19 Nov 2009 14:30:21 GMT

After another search using "hot adding" I found this:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00575067

Re: Adding new msa20 to existing msa1500 with msa30

Gordon Bratsberg — Thu, 19 Nov 2009 14:37:20 GMT

Yeah thats the article I quoted from.It's looking to me like the MSA20 is hot addable but the IO card is going to require shutting down the msa1500.I hope I'm wrong.Thanks for your help.