<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic SmartArray P400: Problem expanding array with new disk in Disk Enclosures</title>
    <link>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540544#M33495</link>
    <description>I'm trying to expand a raid5 array on a P400 Controller (DL380 G5)&lt;BR /&gt;&lt;BR /&gt;when i try to expand the array whith hpacucli i get the following error:&lt;BR /&gt;&lt;BR /&gt;----&lt;BR /&gt;=&amp;gt; ctrl slot=1 ld 1 add drives=2I:1:4&lt;BR /&gt;&lt;BR /&gt;Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration.&lt;BR /&gt;----&lt;BR /&gt;&lt;BR /&gt;The disk i'm trying to add is a 72Gb 10K SAS drive:&lt;BR /&gt;----&lt;BR /&gt; hpacucli ctrl slot=1 pd 2I:1:4 show&lt;BR /&gt;&lt;BR /&gt;Smart Array P400 in Slot 1&lt;BR /&gt;&lt;BR /&gt;   unassigned&lt;BR /&gt;&lt;BR /&gt;      physicaldrive 2I:1:4&lt;BR /&gt;         Port: 2I&lt;BR /&gt;         Box: 1&lt;BR /&gt;         Bay: 4&lt;BR /&gt;         Status: OK&lt;BR /&gt;         Drive Type: Unassigned Drive&lt;BR /&gt;         Interface Type: SAS&lt;BR /&gt;         Size: 72 GB&lt;BR /&gt;         Rotational Speed: 10000&lt;BR /&gt;         Firmware Revision: HPDA&lt;BR /&gt;         Serial Number:         P2XR3Z5A&lt;BR /&gt;         Model: HP      DG072BAAJA&lt;BR /&gt;         PHY Count: 2&lt;BR /&gt;         PHY Transfer Rate: Unknown, Unknown&lt;BR /&gt;----&lt;BR /&gt;&lt;BR /&gt;the other disks are like this one:&lt;BR /&gt;----&lt;BR /&gt;pacucli ctrl slot=1 pd 2I:1:1 show&lt;BR /&gt;&lt;BR /&gt;Smart Array P400 in Slot 1&lt;BR /&gt;&lt;BR /&gt;   array A&lt;BR /&gt;&lt;BR /&gt;      physicaldrive 2I:1:1&lt;BR /&gt;         Port: 2I&lt;BR /&gt;         Box: 1&lt;BR /&gt;         Bay: 1&lt;BR /&gt;         Status: OK&lt;BR /&gt;         Drive Type: Data Drive&lt;BR /&gt;         Interface Type: SAS&lt;BR /&gt;         Size: 72 GB&lt;BR /&gt;         Rotational Speed: 10000&lt;BR /&gt;         Firmware Revision: HPD7&lt;BR /&gt;         Serial Number: 3NP1KDT000009808U35G&lt;BR /&gt;         Model: HP      DG072ABAB3&lt;BR /&gt;         PHY Count: 1&lt;BR /&gt;         PHY Transfer Rate: Unknown&lt;BR /&gt;----&lt;BR /&gt;&lt;BR /&gt;The new drive seams to be working and i can build a single disk raid 0 logical drive in it.&lt;BR /&gt;&lt;BR /&gt;is there a reason because this disk can't be added to the array?&lt;BR /&gt;&lt;BR /&gt;thanks all.&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;</description>
    <pubDate>Thu, 26 Nov 2009 16:35:22 GMT</pubDate>
    <dc:creator>Claudio Della Ciana</dc:creator>
    <dc:date>2009-11-26T16:35:22Z</dc:date>
    <item>
      <title>SmartArray P400: Problem expanding array with new disk</title>
      <link>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540544#M33495</link>
      <description>I'm trying to expand a raid5 array on a P400 Controller (DL380 G5)&lt;BR /&gt;&lt;BR /&gt;when i try to expand the array whith hpacucli i get the following error:&lt;BR /&gt;&lt;BR /&gt;----&lt;BR /&gt;=&amp;gt; ctrl slot=1 ld 1 add drives=2I:1:4&lt;BR /&gt;&lt;BR /&gt;Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration.&lt;BR /&gt;----&lt;BR /&gt;&lt;BR /&gt;The disk i'm trying to add is a 72Gb 10K SAS drive:&lt;BR /&gt;----&lt;BR /&gt; hpacucli ctrl slot=1 pd 2I:1:4 show&lt;BR /&gt;&lt;BR /&gt;Smart Array P400 in Slot 1&lt;BR /&gt;&lt;BR /&gt;   unassigned&lt;BR /&gt;&lt;BR /&gt;      physicaldrive 2I:1:4&lt;BR /&gt;         Port: 2I&lt;BR /&gt;         Box: 1&lt;BR /&gt;         Bay: 4&lt;BR /&gt;         Status: OK&lt;BR /&gt;         Drive Type: Unassigned Drive&lt;BR /&gt;         Interface Type: SAS&lt;BR /&gt;         Size: 72 GB&lt;BR /&gt;         Rotational Speed: 10000&lt;BR /&gt;         Firmware Revision: HPDA&lt;BR /&gt;         Serial Number:         P2XR3Z5A&lt;BR /&gt;         Model: HP      DG072BAAJA&lt;BR /&gt;         PHY Count: 2&lt;BR /&gt;         PHY Transfer Rate: Unknown, Unknown&lt;BR /&gt;----&lt;BR /&gt;&lt;BR /&gt;the other disks are like this one:&lt;BR /&gt;----&lt;BR /&gt;pacucli ctrl slot=1 pd 2I:1:1 show&lt;BR /&gt;&lt;BR /&gt;Smart Array P400 in Slot 1&lt;BR /&gt;&lt;BR /&gt;   array A&lt;BR /&gt;&lt;BR /&gt;      physicaldrive 2I:1:1&lt;BR /&gt;         Port: 2I&lt;BR /&gt;         Box: 1&lt;BR /&gt;         Bay: 1&lt;BR /&gt;         Status: OK&lt;BR /&gt;         Drive Type: Data Drive&lt;BR /&gt;         Interface Type: SAS&lt;BR /&gt;         Size: 72 GB&lt;BR /&gt;         Rotational Speed: 10000&lt;BR /&gt;         Firmware Revision: HPD7&lt;BR /&gt;         Serial Number: 3NP1KDT000009808U35G&lt;BR /&gt;         Model: HP      DG072ABAB3&lt;BR /&gt;         PHY Count: 1&lt;BR /&gt;         PHY Transfer Rate: Unknown&lt;BR /&gt;----&lt;BR /&gt;&lt;BR /&gt;The new drive seams to be working and i can build a single disk raid 0 logical drive in it.&lt;BR /&gt;&lt;BR /&gt;is there a reason because this disk can't be added to the array?&lt;BR /&gt;&lt;BR /&gt;thanks all.&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;</description>
      <pubDate>Thu, 26 Nov 2009 16:35:22 GMT</pubDate>
      <guid>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540544#M33495</guid>
      <dc:creator>Claudio Della Ciana</dc:creator>
      <dc:date>2009-11-26T16:35:22Z</dc:date>
    </item>
    <item>
      <title>Re: SmartArray P400: Problem expanding array with new disk</title>
      <link>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540545#M33496</link>
      <description>Hi Claudio,&lt;BR /&gt;I suspect 512 MB BBWC is not installed on this controller that's Array expansion could not be done.&lt;BR /&gt;&lt;BR /&gt;Reference QuickSpecs :&lt;BR /&gt;256 MB 40-bit wide DDR2-533MHz cache upgradeable to 512 MB 72-bit wide DDR2-533MHz battery-backed cache provides up to 4.2 GB/s maximum bandwidth &lt;BR /&gt;# Modular, easy-to-upgrade design lets you optimize performance by upgrading from 40-bit 256MB cache to 72-bit 512MB battery-backed write cache (BBWC).&lt;BR /&gt;# Addition of the battery backed cache upgrade enables BBWC, RAID 6 with ADG, array expansion, logical drive extension, RAID migration, and stripe size migration. &lt;BR /&gt;&lt;BR /&gt;&lt;A href="http://h18004.www1.hp.com/products/quickspecs/12400_div/12400_div.html" target="_blank"&gt;http://h18004.www1.hp.com/products/quickspecs/12400_div/12400_div.html&lt;/A&gt;</description>
      <pubDate>Fri, 27 Nov 2009 00:55:00 GMT</pubDate>
      <guid>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540545#M33496</guid>
      <dc:creator>TarunJain</dc:creator>
      <dc:date>2009-11-27T00:55:00Z</dc:date>
    </item>
    <item>
      <title>Re: SmartArray P400: Problem expanding array with new disk</title>
      <link>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540546#M33497</link>
      <description>hi claudio&lt;BR /&gt;&lt;BR /&gt;ensure&lt;BR /&gt;&lt;BR /&gt;Smart Array P400 Controller    &lt;BR /&gt;HP Smart Array P400/256MB Controller&lt;BR /&gt;NOTE: The HP Smart Array P400/256 MB Controller (PN 405132-B21) may only be installed in slots 3, 4, and 5.&lt;BR /&gt;  &lt;BR /&gt;405132-B21&lt;BR /&gt;HP Smart Array P400/512MB BBWC Controller&lt;BR /&gt;NOTE: The HP Smart Array P400/512 MB BBWC Controller (PN 411064-B21) may only be installed in slots 3, 4, and 5.  &lt;BR /&gt;411064-B21&lt;BR /&gt;ensure battery and cache are present and cable is connected  correct to battery&lt;BR /&gt;&lt;BR /&gt;as some went out with out the cable the cable was in but to short so never connected at the other side there was an advisory on that isssue&lt;BR /&gt;&lt;BR /&gt;HP SA-P400 and SA-E500 24 In Battery Cable Kit&lt;BR /&gt;NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array E500 or Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.  417836-B21&lt;BR /&gt;&lt;BR /&gt;part referance guide is below&lt;BR /&gt;HP SA-P400 and SA-E500 24 In Battery Cable Kit&lt;BR /&gt;NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array E500 or Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.  417836-B21&lt;BR /&gt;&lt;BR /&gt;enjoy and goodluck&lt;BR /&gt;&lt;BR /&gt;This is how we thank in the forum&lt;BR /&gt;&lt;BR /&gt;&lt;A href="http://forums11.itrc.hp.com/service/forums/helptips.do?#33" target="_blank"&gt;http://forums11.itrc.hp.com/service/forums/helptips.do?#33&lt;/A&gt;&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;</description>
      <pubDate>Sat, 28 Nov 2009 01:16:49 GMT</pubDate>
      <guid>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540546#M33497</guid>
      <dc:creator>marcus1234</dc:creator>
      <dc:date>2009-11-28T01:16:49Z</dc:date>
    </item>
    <item>
      <title>Re: SmartArray P400: Problem expanding array with new disk</title>
      <link>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540547#M33498</link>
      <description>claudio  almost forgot ..this guide has all specs in for your server &lt;BR /&gt;&lt;BR /&gt;&lt;A href="http://h18000.www1.hp.com/products/quickspecs/12477_na/12477_na.html#Additional%20Options" target="_blank"&gt;http://h18000.www1.hp.com/products/quickspecs/12477_na/12477_na.html#Additional%20Options&lt;/A&gt;&lt;BR /&gt;&lt;BR /&gt;enjoy..</description>
      <pubDate>Sat, 28 Nov 2009 01:18:28 GMT</pubDate>
      <guid>https://community.hpe.com/t5/disk-enclosures/smartarray-p400-problem-expanding-array-with-new-disk/m-p/4540547#M33498</guid>
      <dc:creator>marcus1234</dc:creator>
      <dc:date>2009-11-28T01:18:28Z</dc:date>
    </item>
  </channel>
</rss>

