https://community.hpe.com/t5/disk-enclosures/p800-msa60-decides-to-be-boot-controller/m-p/4547151#M33608 I installed several DL380G6 servers recently and connected each one via a P800 to a MSA60. Each P800 somehow 'decided' to become the boot controller, rather than the onboard P410i. I certainly did not set this to be the case, as each server has internal disks with the O/S.<BR /><BR />Has anyone seen this before?<BR /><BR /> Wed, 09 Dec 2009 15:13:36 GMT Donal Rogers_1 2009-12-09T15:13:36Z https://community.hpe.com/t5/disk-enclosures/p800-msa60-decides-to-be-boot-controller/m-p/4547151#M33608 I installed several DL380G6 servers recently and connected each one via a P800 to a MSA60. Each P800 somehow 'decided' to become the boot controller, rather than the onboard P410i. I certainly did not set this to be the case, as each server has internal disks with the O/S.<BR /><BR />Has anyone seen this before?<BR /><BR /> Wed, 09 Dec 2009 15:13:36 GMT https://community.hpe.com/t5/disk-enclosures/p800-msa60-decides-to-be-boot-controller/m-p/4547151#M33608 Donal Rogers_1 2009-12-09T15:13:36Z