https://community.hpe.com/t5/disk-enclosures/command-view-running-on-one-eva-port/m-p/4553696#M33738 Hi,<BR />Will it work to zone in only one EVA port to the appliance server and run command view through this port, or does CV require one port from each controller?<BR /><BR />-inex Mon, 21 Dec 2009 21:25:31 GMT inex 2009-12-21T21:25:31Z https://community.hpe.com/t5/disk-enclosures/command-view-running-on-one-eva-port/m-p/4553696#M33738 Hi,<BR />Will it work to zone in only one EVA port to the appliance server and run command view through this port, or does CV require one port from each controller?<BR /><BR />-inex Mon, 21 Dec 2009 21:25:31 GMT https://community.hpe.com/t5/disk-enclosures/command-view-running-on-one-eva-port/m-p/4553696#M33738 inex 2009-12-21T21:25:31Z https://community.hpe.com/t5/disk-enclosures/command-view-running-on-one-eva-port/m-p/4553697#M33739 CV only talks to the master controller, so it's logical to give it access to both controllers, since if one reboots or it's stopped, the other becames master and CV would have no access to it.<BR /><BR />And following the current advice, include only one EVA port in each zone. Tue, 22 Dec 2009 00:02:43 GMT https://community.hpe.com/t5/disk-enclosures/command-view-running-on-one-eva-port/m-p/4553697#M33739 Víctor Cespón 2009-12-22T00:02:43Z