topic The VA7110 lssue in Disk Enclosures

The VA7110 lssue

luozb0076 — Tue, 22 Dec 2009 16:41:53 GMT

I replaced VA7110 hard

to replace the hard disk prior to confirmation rebuiding completed,

After replacing the hard disk, VA7110 Tip: "The Subsystem is BALANCING."

To wait nearly two hours, or tips: "The Subsystem is BALANCING."

VA7110 hard disk light keep flashing

My VA is now running a single controller in

I ask whether the situation is normal?

Please give me some suggestions

Thanks!

dsp-s output is as follows:
Warning State > dsp -s

SUBSYSTEM SETTINGS:
Capacity Depletion Threshold: 0
Subsystem Level RAID Control: AutoRAID
Enable Manual Override: FALSE
Manual Override Destination: FALSE
Enable Optimize Policy: FALSE
Read Cache Disable: FALSE
Write Cache Enable: FALSE
Enable Prefetch: TRUE
Rebuild Priority: LOW
Unit Attention: TRUE
Disabl Sec Path Presentation: FALSE
Volume Set Partitioning: FALSE
Write Working Set Interval: 0x21C0

RESILIENCY SETTINGS
Enable Secure Mode: TRUE
Disable NVRAM on UPS Absent: FALSE
Disable NVRAM on WCE False: FALSE
Disable Read Hits: FALSE
Force Unit Access Response: 1
Lock Write Cache On: TRUE
Resiliency Threshold: 4 s
Single Controller Warning: TRUE

DISK SETTINGS
Auto Include: TRUE
Auto Rebuild: TRUE
Hot Spare Mode: No Hot Spare
Max Drives per Subsystem: 45

LUN SETTINGS
LUN Creation Limit: 1024
Maximum LUN Creation Limit: 1024
Migrating Write Destination: FALSE
Security Enabled: FALSE

PORT SETTINGS
Controller 1 Host Port1
Loop ID: 110
Link Topology: Direct Fabric Attach
OS Behavior: HP-UX
Port WWN: 0x50060b000026c4cc
Queue Full Threshold: 750
Data Rate: 2 GB/sec
Controller 1 JBOD Port1
Data Rate: 2 GB/sec

STATUS
Subsystem State: 1

The Subsystem is BALANCING.
The Subsystem is TESTING.
WARNINGS
Controller Problem
RAM Unmirrored
Single Controller

Warning State >
Warning State >

Re: The VA7110 lssue

Torsten. — Tue, 22 Dec 2009 16:44:52 GMT

BALANCING is nomal, but single controller is not. Bad controller?

Re: The VA7110 lssue

luozb0076 — Tue, 22 Dec 2009 17:12:21 GMT

Yes!

The day before yesterday, my system suddenly halted and oracle can not login, the file system can not mounted

Later, I had to reboot server, but reboot is not up,

After the fiber was stripped off and then the server can start the server, but can not find the VA's hard drive,

At this time VA check the status, (dsp -c/dsp-d / dsp-s / dsp-e / dsp / L)

No hardware failure

Still later, stripped off after the VA controller 2 can normally find a hard drive, system and application of both normal

However, later found a bad hard drive, so ready to first replace the hard disk, then replace the controller

Re: The VA7110 lssue

luozb0076 — Tue, 22 Dec 2009 17:23:27 GMT

Thanks! Torsten.

I'm waiting for you help

Re: The VA7110 lssue

Torsten. — Tue, 22 Dec 2009 17:43:20 GMT

Can you send a

armdsp -a

Re: The VA7110 lssue

luozb0076 — Tue, 22 Dec 2009 17:53:18 GMT

I stripped off a controller
armdsp-a VA7110 No response

I am concerned that VA is not rebuilding

Re: The VA7110 lssue

luozb0076 — Tue, 22 Dec 2009 18:04:45 GMT

all right

Will this case, can I implement armdiscover?

Sorry, I am now in China, I have here now is 3:00 at night, I need a break,

Thank you for your help

Thank you very much