https://community.hpe.com/t5/disk-enclosures/default-configuration-for-hp-smart-array-p410i/m-p/4590395#M34355 I have several HP G6 servers, DL360s and DL380s. When I would delete the configuration on the P410i controller and reboot the server it would give me 3 options, F8 to enter config mode, F7 to accept the default config, or escape to skip the config and continue. If I did nothing, it would automatically use F7 and put a default configuration based on the number of drives attached to the controller. <BR /><BR />Recently I have noticed a change in the behavior. On some of my servers the controller does not load the default, and it doesnt even give the option. I have controllers at FW version 2.50 that work the old way, and others that dont, so I have no clue what the difference is, or where to even start looking.<BR /><BR />Thanks Wed, 24 Feb 2010 20:40:15 GMT ArtBaldini 2010-02-24T20:40:15Z https://community.hpe.com/t5/disk-enclosures/default-configuration-for-hp-smart-array-p410i/m-p/4590395#M34355 I have several HP G6 servers, DL360s and DL380s. When I would delete the configuration on the P410i controller and reboot the server it would give me 3 options, F8 to enter config mode, F7 to accept the default config, or escape to skip the config and continue. If I did nothing, it would automatically use F7 and put a default configuration based on the number of drives attached to the controller. <BR /><BR />Recently I have noticed a change in the behavior. On some of my servers the controller does not load the default, and it doesnt even give the option. I have controllers at FW version 2.50 that work the old way, and others that dont, so I have no clue what the difference is, or where to even start looking.<BR /><BR />Thanks Wed, 24 Feb 2010 20:40:15 GMT https://community.hpe.com/t5/disk-enclosures/default-configuration-for-hp-smart-array-p410i/m-p/4590395#M34355 ArtBaldini 2010-02-24T20:40:15Z