https://community.hpe.com/t5/disk-enclosures/hp-storage-work-msa-2212fc-dual-controller/m-p/4601389#M34522 hi.i have one msa 2212fc dual controller and 12 number hard sata 500 gb on the enclosure .one of the hard disks is eroor and faild.i change the hard but this hard is not find invdisk and volume.my raid volume is 5.thanks Tue, 16 Mar 2010 07:31:17 GMT mm3000 2010-03-16T07:31:17Z https://community.hpe.com/t5/disk-enclosures/hp-storage-work-msa-2212fc-dual-controller/m-p/4601389#M34522 hi.i have one msa 2212fc dual controller and 12 number hard sata 500 gb on the enclosure .one of the hard disks is eroor and faild.i change the hard but this hard is not find invdisk and volume.my raid volume is 5.thanks Tue, 16 Mar 2010 07:31:17 GMT https://community.hpe.com/t5/disk-enclosures/hp-storage-work-msa-2212fc-dual-controller/m-p/4601389#M34522 mm3000 2010-03-16T07:31:17Z https://community.hpe.com/t5/disk-enclosures/hp-storage-work-msa-2212fc-dual-controller/m-p/4601390#M34523 you need to conect to the configuration utility and adding the disk to the volome. When you replace a disk, the disk not automaticaly replace the failed disk. you do perform the change manualy. <BR /><BR />sorry form my poor english ;) Fri, 19 Mar 2010 07:26:50 GMT https://community.hpe.com/t5/disk-enclosures/hp-storage-work-msa-2212fc-dual-controller/m-p/4601390#M34523 Daniel Bernardo 2010-03-19T07:26:50Z