https://community.hpe.com/t5/disk-enclosures/how-to-boot-from-multiple-logical-drives/m-p/4611803#M34640 From what I can see, you can't even change the order of the array's. There's got to be an explanation to this. I can't believe HP designed this on purpose. Sat, 03 Apr 2010 21:08:47 GMT Mircea Giurgeu_1 2010-04-03T21:08:47Z https://community.hpe.com/t5/disk-enclosures/how-to-boot-from-multiple-logical-drives/m-p/4611801#M34638 Hi all,<BR /><BR />P410 controller in a DL370. I have multiple physical disks configured in multiple arrays: <BR />- Array 1 with Logical Drive A<BR />- Array 2 with Logical Drive B<BR />- Array 3 with Logical Drive C<BR /><BR />How do I configure the server to boot from a specific Logical drive (A or B or C)?<BR /><BR />I can't find anything in ACU on in ROM Based Setup (F9) where I can specify which array I want to boot from. <BR /><BR />tx, Sat, 03 Apr 2010 13:50:41 GMT https://community.hpe.com/t5/disk-enclosures/how-to-boot-from-multiple-logical-drives/m-p/4611801#M34638 Mircea Giurgeu_1 2010-04-03T13:50:41Z https://community.hpe.com/t5/disk-enclosures/how-to-boot-from-multiple-logical-drives/m-p/4611802#M34639 Smart Array controllers boot from the first logical unit on the first array. That cannot be changed. Sat, 03 Apr 2010 14:32:17 GMT https://community.hpe.com/t5/disk-enclosures/how-to-boot-from-multiple-logical-drives/m-p/4611802#M34639 Víctor Cespón 2010-04-03T14:32:17Z https://community.hpe.com/t5/disk-enclosures/how-to-boot-from-multiple-logical-drives/m-p/4611803#M34640 From what I can see, you can't even change the order of the array's. There's got to be an explanation to this. I can't believe HP designed this on purpose. Sat, 03 Apr 2010 21:08:47 GMT https://community.hpe.com/t5/disk-enclosures/how-to-boot-from-multiple-logical-drives/m-p/4611803#M34640 Mircea Giurgeu_1 2010-04-03T21:08:47Z