https://community.hpe.com/t5/disk-enclosures/msa2012i-single-controller/m-p/4618671#M34792 <!--!*#-->Hello, I need to save the configuration of the controller to replace it.<BR />I can not access post SMU to save the settings, and I have it blocked.<BR />is there any way to save the configuration by command cli.<BR />If I add the controller replacement, as a slave, would replicate the configuration of the controller?<BR />Thanks in advance Thu, 15 Apr 2010 20:38:50 GMT jose luis salinas 2010-04-15T20:38:50Z https://community.hpe.com/t5/disk-enclosures/msa2012i-single-controller/m-p/4618671#M34792 <!--!*#-->Hello, I need to save the configuration of the controller to replace it.<BR />I can not access post SMU to save the settings, and I have it blocked.<BR />is there any way to save the configuration by command cli.<BR />If I add the controller replacement, as a slave, would replicate the configuration of the controller?<BR />Thanks in advance Thu, 15 Apr 2010 20:38:50 GMT https://community.hpe.com/t5/disk-enclosures/msa2012i-single-controller/m-p/4618671#M34792 jose luis salinas 2010-04-15T20:38:50Z https://community.hpe.com/t5/disk-enclosures/msa2012i-single-controller/m-p/4618672#M34793 Have you tried to log on to controller interface via COM-port?<BR /><BR />&gt;would replicate the configuration of the controller?<BR /><BR />Yes. But remember, that both controllers should have the same firmware version. Mon, 19 Apr 2010 05:31:03 GMT https://community.hpe.com/t5/disk-enclosures/msa2012i-single-controller/m-p/4618672#M34793 Prokopets 2010-04-19T05:31:03Z