RAID Fast Track controller TX2300

Jose Lopez M. — Fri, 23 Apr 2010 17:01:46 GMT

Good afternoon gentleman,

I just upgrated to Windows 7 64bit my HP Pavillion d4100e computer wich came with a RAID Fast Track controller TX2300, but after upgrading the RAID configuration is gone, instead of one hard drive, the computer recognizes two, one empty and the other one with the operating system. Can anyone please provide settings and the process to configure the RAID hard drives again?. I had tried to used the fast track utility wich has 5 options, but none of them workred.

Thanks in advance.

Re: RAID Fast Track controller TX2300

cnb — Fri, 23 Apr 2010 17:32:18 GMT

You might have better luck over in the Windows 7 or workstations forum:

http://forums11.itrc.hp.com/service/forums/categoryhome.do?categoryId=1275

or try Promise Technologies Support pages:

http://promise.com/support/download.aspx?from=product_series&SeriesSn=9&ModelSn=66&m=205&region=en-US

Rgds,

topic RAID Fast Track controller TX2300 in Disk Enclosures

RAID Fast Track controller TX2300

Re: RAID Fast Track controller TX2300