https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629853#M34984 There's no power button, just apply or remove power to the enclosure power supplies. Thu, 06 May 2010 18:55:20 GMT Víctor Cespón 2010-05-06T18:55:20Z https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629852#M34983 Will need to reboot server and the MSA 30 that is attached. What is the best way to shutdown and power off the MSA 30 storage unit. Did not see a power button on the unit.<BR /><BR />Running Hp-ux 11.23. Thu, 06 May 2010 18:52:19 GMT https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629852#M34983 james gould 2010-05-06T18:52:19Z https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629853#M34984 There's no power button, just apply or remove power to the enclosure power supplies. Thu, 06 May 2010 18:55:20 GMT https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629853#M34984 Víctor Cespón 2010-05-06T18:55:20Z https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629854#M34985 ok - I was going to run the<BR />"shutdown -h now" wait till server shuts down. Then power off the msa30 by unplugging the power to the unit then the same to the server. Is that correct? Thu, 06 May 2010 19:02:22 GMT https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629854#M34985 james gould 2010-05-06T19:02:22Z https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629855#M34986 Yes. First shutdown the connected server(s), then power off the storage. Fri, 07 May 2010 11:12:31 GMT https://community.hpe.com/t5/disk-enclosures/msa-30-shutdown/m-p/4629855#M34986 Torsten. 2010-05-07T11:12:31Z