https://community.hpe.com/t5/disk-enclosures/upgrading-code-on-msa200fc/m-p/4639807#M35121 We have a customer with version 25 code on a MSA2000fc system. We want to upgrade to 28 code.<BR />Should controller code be upgraded first and then disk code? Is gui the best way of doing code upgrade?<BR /><BR />-inex Sun, 30 May 2010 13:21:04 GMT inex 2010-05-30T13:21:04Z https://community.hpe.com/t5/disk-enclosures/upgrading-code-on-msa200fc/m-p/4639807#M35121 We have a customer with version 25 code on a MSA2000fc system. We want to upgrade to 28 code.<BR />Should controller code be upgraded first and then disk code? Is gui the best way of doing code upgrade?<BR /><BR />-inex Sun, 30 May 2010 13:21:04 GMT https://community.hpe.com/t5/disk-enclosures/upgrading-code-on-msa200fc/m-p/4639807#M35121 inex 2010-05-30T13:21:04Z https://community.hpe.com/t5/disk-enclosures/upgrading-code-on-msa200fc/m-p/4639808#M35122 Hi inex,<BR /><BR />You can find the firmware for HP MSA2000fc at the following link -<BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&amp;cc=us&amp;prodTypeId=18964&amp;prodSeriesId=499896&amp;swItem=co-58817-1&amp;prodNameId=499900&amp;swEnvOID=1060&amp;swLang=13&amp;taskId=135&amp;mode=3" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&amp;cc=us&amp;prodTypeId=18964&amp;prodSeriesId=499896&amp;swItem=co-58817-1&amp;prodNameId=499900&amp;swEnvOID=1060&amp;swLang=13&amp;taskId=135&amp;mode=3</A><BR />Check the Installation instruction and release notes before you proceed.<BR /><BR />Hope this helps.<BR /><BR />Regards,<BR />Murali Sun, 30 May 2010 14:43:52 GMT https://community.hpe.com/t5/disk-enclosures/upgrading-code-on-msa200fc/m-p/4639808#M35122 P Muralidhar Kini 2010-05-30T14:43:52Z