topic HP-PROLIANT ML150 G3 - RAID SOFTWARE in Disk Enclosures

HP-PROLIANT ML150 G3 - RAID SOFTWARE

TheLaba — Tue, 01 Jun 2010 09:52:10 GMT

I've got a server (see subject) and I can't find the software to manage the array.
In windows manager device I can see this device:
LSI Adapter, SAS 3000 series, 8-port with 1068E -StorPort
there is 3 serial SCSI HD (72 GB).
I can't find where can i download Raid software Manager.
I already installed HP StorageManager and all HP ProLiant Smart Array SAS/SATA series, no one detect my raid hw end configuration.

Please someone help me !! I can't upgrade hd config !!

Re: HP-PROLIANT ML150 G3 - RAID SOFTWARE

Jan Soska — Tue, 01 Jun 2010 20:40:46 GMT

Hello,
if you use windows2003, please check all available downloads for this server on:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3279687&prodTypeId=15351&prodSeriesId=1163831&swLang=8&taskId=135&swEnvOID=1005#78214 , then install and use HP ProLiant Array Configuration Utility - direct link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1163831&prodNameId=3279687&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-8deb8ec00ca740d4b69c47b32d

I hope it helps.

Jan

Re: HP-PROLIANT ML150 G3 - RAID SOFTWARE

TheLaba — Thu, 03 Jun 2010 09:02:50 GMT

I reinstalled the sw that you linked...
but the message is:
----------------
Welcome to ACU, the Array Configuration Utility
ACU did not detect any supported controllers in your system.

You may click on the Rescan link above to re-examine the system. If no controllers are detected after a rescan, please make sure the devices are installed correctly.
----------------

Re: HP-PROLIANT ML150 G3 - RAID SOFTWARE

Jan Soska — Thu, 03 Jun 2010 12:46:57 GMT

Hello, try this manual. This is what you need:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01232490/c01232490.pdf

Jan

Re: HP-PROLIANT ML150 G3 - RAID SOFTWARE

J. Muurling — Mon, 28 Jun 2010 22:40:13 GMT

Hi,

I had the same problem which I solved recently.
Try the MegaRAID software from LSI.
The link is:
http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/