topic Re: determining controller dram in Disk Enclosures

determining controller dram

Doug_3 — Mon, 03 Dec 2001 23:19:01 GMT

Hello,
We do not have the original 12h documentation one purchase and installation config.

Can anyone tell me how to determine how much dram is on our 12h autoraid controllers? I'll cross post to lvm and disk array if no response, but hopefully someone has a command than generates the current installed dram.

tia
Doug

Re: determining controller dram

Sanjay_6 — Mon, 03 Dec 2001 23:28:38 GMT

Hi Doug,

The controller memory is mentioned on the controller itself. Follow this link for all 12H manuals,

http://www.hp.com/cposupport/manindex/hpsurestor19162_eng_man.html

Hope this helps.

Regds

Re: determining controller dram

A. Clay Stephenson — Mon, 03 Dec 2001 23:40:04 GMT

Hi Doug:

This is easy. Go to the front panel and Press 'Menu'.
Press '+' until 'View Settings' appears; Press 'Enter'.
Press '+' until 'Mbytes of RAM' appears and read the value.
Press 'Cancel'; Press 'Cancel'.

Clay

Re: determining controller dram

Bill McNAMARA_1 — Tue, 04 Dec 2001 08:34:09 GMT

even quicker..

arraydsp -i
to get the array serial number
(ARMServer must be running - should be by default /sbin/init.d/hparray start)

arraydsp -a ID

and you'll see all the array configuration

arraydsp -c ID

for the controller information

arraydsp -l ID

for the lun configuration.

arraycfg to create/delete luns

arraymgr to set cache and other mgmt params.

Later,
Bill