https://community.hpe.com/t5/disk-enclosures/eva-loop-cable-part-number/m-p/4696465#M36009 EVA6400 uses fc-copper loop cables of two different length (1ft &amp; 6ft). For a shelf upgrade we received two 1ft cables with the shelf but need to order 6ft once and need part number for it. Please help.<BR /><BR />Thanks in advance. Thu, 07 Oct 2010 10:31:47 GMT Amar_Joshi 2010-10-07T10:31:47Z https://community.hpe.com/t5/disk-enclosures/eva-loop-cable-part-number/m-p/4696465#M36009 EVA6400 uses fc-copper loop cables of two different length (1ft &amp; 6ft). For a shelf upgrade we received two 1ft cables with the shelf but need to order 6ft once and need part number for it. Please help.<BR /><BR />Thanks in advance. Thu, 07 Oct 2010 10:31:47 GMT https://community.hpe.com/t5/disk-enclosures/eva-loop-cable-part-number/m-p/4696465#M36009 Amar_Joshi 2010-10-07T10:31:47Z https://community.hpe.com/t5/disk-enclosures/eva-loop-cable-part-number/m-p/4696466#M36010 432374-001 4GB copper fibre SFP interface cable - 4-conductor wire, 2.0m (6.5ft) long <BR /><BR />is the part number. But I hope there is a mistake done during the installation. There wont be 6ft cables shipped with new enclosure. The new EVA will be shipped with 6ft cables. At the time of installation we have to use these 6ft cables for the loop(cable between last enclosure IO module to controller). So when doing enclosure upgrade simply we need to remove the cable and will be connected to new enclosure. the new cable (1ft cable) can be used for cascading the enclsoures.<BR /><BR />Siva. Thu, 07 Oct 2010 14:35:11 GMT https://community.hpe.com/t5/disk-enclosures/eva-loop-cable-part-number/m-p/4696466#M36010 Sivaramakrishna_1 2010-10-07T14:35:11Z