topic EVA 8400 Cabling Guide in Disk Enclosures

EVA 8400 Cabling Guide

Anubhav Dhingra — Tue, 12 Oct 2010 17:59:04 GMT

Hi All,

I need the cabling diagram of EVA 8400 2C6D. we have recieved the EVA 8400 from HP factory and the DiskEnclosures were shipped out of the Rack. Only HSV controllers were Factory Inegrated in the Rack.

Re: EVA 8400 Cabling Guide

Uwe Zessin — Tue, 12 Oct 2010 18:32:06 GMT

A few weeks back I've looked it up for a customer:

- HP StorageWorks 6400/8400 Enterprise Virtual Array

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=12169&prodSeriesId=3900918

- HP StorageWorks EVA6400/8400 M6412A disk enclosure installation instructions
5697-0474__20100520.pdf (2.204MB - June 2010) [2ed] - c02248317

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02248317/c02248317.pdf

The cabling of more than one enclosure is not explained well I think, so I made an ASCII drawing based on Figure 14 on page 6 - attached. ("/" indicates the short cables)

Re: EVA 8400 Cabling Guide

Sivaramakrishna_1 — Wed, 13 Oct 2010 01:42:11 GMT

Hi,

The EVA8400 is supposed to be installed by HP Filed Specialist.

You can log a case to HP Installation supoort to get it installed.

Regards,
Siva

Re: EVA 8400 Cabling Guide

Mike Texter — Tue, 23 Jul 2013 15:46:15 GMT

Not everyone has an HP support contract, thanks Uwe for the links!