topic Re: Command View Update and Firmware compatibility in Disk Enclosures

Command View Update and Firmware compatibility

ALIPRANDI — Thu, 04 Nov 2010 06:25:55 GMT

Hi,
We would like to have one version of Command View to drive two disk array
- 1 EVA 4400 (XCS 09522000)
- 1 EVA 4100 (CR0ECAxc3p-6110)
Do we have to change the versions of XCS on the Disk Arrays ?
Do we have to verify anything else ?
Is there a limitation on the HBA versions ?
Where can I find documentation with a full comatibility matrix ?

Thanks.

Re: Command View Update and Firmware compatibility

Rob Leadbeater — Thu, 04 Nov 2010 08:26:36 GMT

Hi,

You can find the latest compatibility matrix here:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02523047/c02523047.pdf

You need to be running at least CV EVA 9.0.1 to manage those two versions. Looking at page 5 of the PDF, "HP recommends that you upgrade [your EVA4100] to XCS 6.2xx if you are using HP Command View EVA 8.0.1 or later"

Regards,

Rob