topic Re: EVA6000 Command View 5.0 login problem in Disk Enclosures

EVA6000 Command View 5.0 login problem

Ivan Tuda — Wed, 17 Nov 2010 10:37:08 GMT

Hi2all!

I connected and zoned EVA storage with management server (Win 2003 server), installed command view 5.0 and now trying to login through web interface (https://localhost:2381) and SSSU.
On web, I am able to login to System management with my domain user/pass, but when I try to open command_view_eva agent, it says: "Proxy Error, The proxy server received an invalid response from an upstream server."
Notice that I'm localy connected with RDP to management server with no proxy option set in IE browser.
Next try, I opened SSSU prompt, entered "select manager localhost user=xxxx password=xxxx" and "select system EVA6000", but I get response:
"EMCLIENTAPI_PERMISSIONDENIED_ERROR : Invalid username or password."

What can I try next to login?

Re: EVA6000 Command View 5.0 login problem

Uwe Zessin — Wed, 17 Nov 2010 20:22:11 GMT

CV versions < 6.0 and older versions of the system management homepage (SMH) did not use Windows authentication. They were using the "Administrator" user + password as defined in the SMH.

Is this a new installation or has this ever worked before?

Re: EVA6000 Command View 5.0 login problem

Ivan Tuda — Thu, 18 Nov 2010 09:09:18 GMT

This system worked before, but we changed it's location and zonned it with different management server.
What is SMH?

Is it problem that each of controllers are connected with only one FC to SAN?

Re: EVA6000 Command View 5.0 login problem

Bhavnish Kamboj (BK) — Tue, 23 Nov 2010 12:50:38 GMT

Try login with your local admin credentials.

Re: EVA6000 Command View 5.0 login problem

Ivan Tuda — Tue, 23 Nov 2010 12:56:36 GMT

I tried to login with local credentials, same thing...

Re: EVA6000 Command View 5.0 login problem

Víctor Cespón — Tue, 23 Nov 2010 13:55:57 GMT

Just one question: why are you using Command View 5.0?
That's way obsolete, is the EVA has firmware 6100 or more recent, you can install CV 9.3.
If not, at least install CV 6.02:

ftp://ftp.hp.com/pub/softlib/software7/COL16255/co-43020-1/T3724-10009.iso

ftp://ftp.hp.com/pub/softlib/software8/COL17042/co-46715-1/T3724-10502CVEVA_6_0_2.zip

Re: EVA6000 Command View 5.0 login problem

Ivan Tuda — Tue, 23 Nov 2010 13:59:21 GMT

Thank you, will try to install and get back.

Re: EVA6000 Command View 5.0 login problem

Ivan Tuda — Wed, 24 Nov 2010 11:57:02 GMT

I managed to connect to array using CV 6.0.
Now I'm trying to initialize the system, but it says following:

Operation failed!

Description Not available

Re: EVA6000 Command View 5.0 login problem

Ivan Tuda — Thu, 25 Nov 2010 08:53:34 GMT

Restarting the Command View service helped.