https://community.hpe.com/t5/disk-enclosures/adding-new-disk/m-p/4751927#M36971 Hi<BR /> <BR /> Where do you need help? at XP or HPUX?<BR /><BR /> Regards, Jorge Mon, 14 Feb 2011 16:13:45 GMT Jorge Pons 2011-02-14T16:13:45Z https://community.hpe.com/t5/disk-enclosures/adding-new-disk/m-p/4751926#M36970 I would like to add a new disk on the existing vg for production and BCV using XP array LDEV on hpux box<BR />. Please help me Sat, 12 Feb 2011 07:02:22 GMT https://community.hpe.com/t5/disk-enclosures/adding-new-disk/m-p/4751926#M36970 Analyst 2011-02-12T07:02:22Z https://community.hpe.com/t5/disk-enclosures/adding-new-disk/m-p/4751927#M36971 Hi<BR /> <BR /> Where do you need help? at XP or HPUX?<BR /><BR /> Regards, Jorge Mon, 14 Feb 2011 16:13:45 GMT https://community.hpe.com/t5/disk-enclosures/adding-new-disk/m-p/4751927#M36971 Jorge Pons 2011-02-14T16:13:45Z https://community.hpe.com/t5/disk-enclosures/adding-new-disk/m-p/4751928#M36972 <P>You need to provision new LUN from XP to HPUX. Then look for this thread to achieve the volumegroup extension<BR /><A href="http://h30499.www3.hp.com/t5/System-Administration/Add-a-disk-to-vg-and-increase-lv-in-a-2-node-Service-guard/m-p/4096009#M311084" target="_blank">http://h30499.www3.hp.com/t5/System-Administration/Add-a-disk-to-vg-and-increase-lv-in-a-2-node-Service-guard/m-p/4096009#M311084</A></P> <P><BR />Create the first mirror sync between primary volume and secondary volume. I prefer to do it from the CommandViewXP but it can also be done through RAIDManager command (find someone who understand RAIDManager otherwise you may reverse sync in error).<BR /><BR />Finaly have the new volume added to the /etc/horcmxx.conf (xx is the number of your horcm service). You need to specifically put it under HORCM_DEV section.</P> Mon, 19 Sep 2011 20:58:25 GMT https://community.hpe.com/t5/disk-enclosures/adding-new-disk/m-p/4751928#M36972 Amar_Joshi 2011-09-19T20:58:25Z