https://community.hpe.com/t5/disk-enclosures/drive-array-driver-cpqarray-sys-doesn-t-start/m-p/2639734#M3708 I'm trying to install NT4 server on a Proliant ML370, but the Drive Array driver doesn't start. I followed the Compaq's recommandations to install mass storage devices : firstly, Drive array driver, then IDE CD-Rom ATAPI, SCSI controllers and StorageWorks Integrated Smart Array/42xx/43xx controllers. <BR />I did a diagnosis with Array Diagnostic Utility but no problem has been detected. My disks (2 x 9.1 Go) seems to work correctly ; I can use disk administrator like the Compaq Array Configuration Utility. All seems OK, except the events I receive when I start my server. <BR />I tried to install latest driver version. <BR />I stayed in Service Pack 1. <BR />Thanks for your help. Mon, 07 Jan 2002 00:00:00 GMT Ayman Altounji 2002-01-07T00:00:00Z https://community.hpe.com/t5/disk-enclosures/drive-array-driver-cpqarray-sys-doesn-t-start/m-p/2639734#M3708 I'm trying to install NT4 server on a Proliant ML370, but the Drive Array driver doesn't start. I followed the Compaq's recommandations to install mass storage devices : firstly, Drive array driver, then IDE CD-Rom ATAPI, SCSI controllers and StorageWorks Integrated Smart Array/42xx/43xx controllers. <BR />I did a diagnosis with Array Diagnostic Utility but no problem has been detected. My disks (2 x 9.1 Go) seems to work correctly ; I can use disk administrator like the Compaq Array Configuration Utility. All seems OK, except the events I receive when I start my server. <BR />I tried to install latest driver version. <BR />I stayed in Service Pack 1. <BR />Thanks for your help. Mon, 07 Jan 2002 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/drive-array-driver-cpqarray-sys-doesn-t-start/m-p/2639734#M3708 Ayman Altounji 2002-01-07T00:00:00Z