topic Re: Command View direct to server in Disk Enclosures

Command View direct to server

Jesus Fdez. — Mon, 28 Mar 2011 11:00:52 GMT

Hello,
I have a CV v9.3 directly connected to a EVA4400 (09534000) and do not see.

Why might that be? Does the CV does not support direct connections to the EVA?

Thanks,

Re: Command View direct to server

Steven Clementi — Mon, 28 Mar 2011 14:10:25 GMT

Does the server see the EVA in the Device Manager?

Steven

Re: Command View direct to server

Jesus Fdez. — Mon, 28 Mar 2011 14:15:07 GMT

Device manager does see the EVA.
From the management module of the EVA. I make a virtual disk, I present and all ok.

Device manager does see all disks.

Thanks,

Re: Command View direct to server

Víctor Cespón — Mon, 28 Mar 2011 14:23:22 GMT

Check in SPOCK that the FCA you're using supports direct connect to an EVA4400. Not all support this. And check what driver you're using.

I had a case recently with an Qlogic HBA that Command View could not access the EVA if the latest driver was installed.

Re: Command View direct to server

Sivaramakrishna_1 — Tue, 29 Mar 2011 02:07:59 GMT

If u have Brocade HBA on the system, then there is a know issue that Command view EVA will not work.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=471497&prodTypeId=12169&objectID=c01980363

The same issue has been observed for 4GB HBA also. The windows Patch is solved the issue.