EVA 5000 - HSV 110 Controller Blower replacement.

Sezgin — Mon, 18 Jul 2011 06:47:40 GMT

Hi everyone,

We have an old EVA 5000. It has 2 HSV Controllers. On one of the controllers one of the 2 blowers' LEDs is amber, in ComandView EVA the blower is shown as below:

Installed? No Attention
Actual speed: 0 RPM

Are the blowers hot plug - can I unplug the blower while the EVA 5000 is running ?

I intend to clean the blower and reinsert it , if it fails again I will order a replacement part.

Best Regards,

Sezgin RAFET

Re: EVA 5000 - HSV 110 Controller Blower replacement.

Johan Guldmyr — Mon, 18 Jul 2011 07:18:40 GMT

Hey!

Yes the controller blowers are hot-pluggable.
You should have two in each. Don't have it out too long as that might cause it to shut down (with the disk shelves it's 7 minutes I believe).

See this page for a video: http://h20464.www2.hp.com/index.html

(at least I think it's there, doesn't show any videos on Chrome).

topic Re: EVA 5000 - HSV 110 Controller Blower replacement. in Disk Enclosures

EVA 5000 - HSV 110 Controller Blower replacement.

Re: EVA 5000 - HSV 110 Controller Blower replacement.