https://community.hpe.com/t5/disk-enclosures/acu/m-p/2652610#M3824 I just got a ML530, with a Smart Array 3200 from another division of my company. The system was COMPLETELY wiped clean, including de-configuring the array controller, which comes up with a 1785 error on boot. The only ACU I can find wants to run under Win32. I can't find one that will run under DOS, so that I can create the array. <BR /> <BR />How can I configure this array? Thanks! <BR /> <BR />TomK Fri, 25 Jan 2002 00:00:00 GMT Ayman Altounji 2002-01-25T00:00:00Z https://community.hpe.com/t5/disk-enclosures/acu/m-p/2652610#M3824 I just got a ML530, with a Smart Array 3200 from another division of my company. The system was COMPLETELY wiped clean, including de-configuring the array controller, which comes up with a 1785 error on boot. The only ACU I can find wants to run under Win32. I can't find one that will run under DOS, so that I can create the array. <BR /> <BR />How can I configure this array? Thanks! <BR /> <BR />TomK Fri, 25 Jan 2002 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/acu/m-p/2652610#M3824 Ayman Altounji 2002-01-25T00:00:00Z https://community.hpe.com/t5/disk-enclosures/acu/m-p/2652611#M3825 Follow Up - <BR />I found the ACU. The previous owners sent me the SmartStart CD, and the array is configured. The next problem is that I can't find NT4 drivers for the SA-3200. Can somebody point me at them? I've looked everywhere I can think of. <BR /> <BR />Thanks again! <BR /> <BR />TomK Tue, 29 Jan 2002 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/acu/m-p/2652611#M3825 Ayman Altounji 2002-01-29T00:00:00Z