topic Event ID 1065 in Disk Enclosures

Event ID 1065

Ayman Altounji — Mon, 28 Jan 2002 00:00:00 GMT

In a Proliant 3000 i have an SA3200 (V4.50) with an external storage case attached. After Installation the system was working trough 4 months without problems, but after a while there is a message in the event log with the ID 1065.
Compaq DriveAccelerator Status change: The accelerator board attached to the array controller in Slot3 has a new status of2.
(Accelerator status values: 1=other; 2=invalid;3=enabled;4=tmpdisabled;5=PermDisabled)
(SNMP TRAP:3025 in CPQIDA.MIB)

has anyone a suggestion whats happen. i can say, that i have changed the adapter with an new from Compaq Spares.

greetings
Hardy

Re: Event ID 1065

Ayman Altounji — Fri, 15 Feb 2002 00:00:00 GMT

Hello
The cause of this ID is the Cache assignment is in undefined state
To Fix it, you can do that

To recreate:
Part A
1. Remove disk from server
2. Boot on SmartStart CD
3. Run Erase
4. Run Array configuration without drives in server
5. Insert the already installed Array Disks let ROC automatically detect Raid set
6. Boot to OS

Part B
1. In ACU choose modify for the logical drive
2. Enable cache for logical drive
3. Save configuration
4. Disable cache for logical drive
5. Save configuration
6. Enable cache for logical drive
7. Save configuration

NOTE: Do this for each logical drive

Re: Event ID 1065

Ayman Altounji — Sat, 16 Feb 2002 00:00:00 GMT

thanks for your suggestion. I tried that and it worked fine.
I look forward and thank you again !!

Hardy