topic Re: compaq storage works in Disk Enclosures

compaq storage works

Adam Strobel — Thu, 04 Aug 2005 11:55:09 GMT

Hi hope I'm in the right area.

I have a compaq storage works with all 18.2 GB 10K UltraA3 scsci disks. I would like to replace one raid (3 disks) with 72.8 GB 10K Ultra A3 scsci disks. Is this possible? and can I swap out one and a time (hot swapable)?

thanks,

--Adam

Re: compaq storage works

Florian Heigl (new acc) — Thu, 04 Aug 2005 12:01:50 GMT

I think You'll have to re-create the raidset, at least the RA3000 I played with some years ago did not come with auto-extension features. Can You specify the exact model You are using?

(and yes, You're in the right area as far as I can tell ;)

Re: compaq storage works

Adam Strobel — Thu, 04 Aug 2005 12:41:44 GMT

Thanks!

I will backup the raid and install the new 72GB drives. Than I will restore the data on the new raid.

Thanks!

Re: compaq storage works

Florian Heigl (new acc) — Thu, 04 Aug 2005 12:50:07 GMT

Good luck and fast copies ;)

Re: compaq storage works

Uwe Zessin — Fri, 05 Aug 2005 12:11:32 GMT

Well, "compaq storage works" can mean any out of several storage controllers.

If this is a SmartArray controller, then you have a good chance that it works for you. Start with a good backup before you pull any disk. Realize that your disk array works in a reduced mode as long as it is rebuilding one disk after the other.

Re: compaq storage works

Adam Strobel — Mon, 08 Aug 2005 08:16:28 GMT

thanks!