topic Re: ODBR in Disk Enclosures

ODBR

Ivan Sum — Fri, 01 Feb 2002 10:11:25 GMT

I have a problem using ODBR,
Server config is
LH3000 with NetRAID
Adaptec scsi card 29160
Tape drive DAT40e

However, when I restore using standard procedure, I got a message saying it couldn't copy the "yes" file.

I've checked the bios version meet the requirement.

what can I do to fix it?
thx

Re: ODBR

Arimo Laine_1 — Thu, 07 Feb 2002 10:14:51 GMT

Hello.

Which BU SW do you use?

Currently only BU SW compatible with OBDR is Tapeware, Arcserve and other vendors are working on it. Even TW needs to have latest service packs installed.

Arimo

Re: ODBR

Ivan Sum — Thu, 21 Feb 2002 09:58:33 GMT

I use ArcServe2000 with SP2 with DR option enabled.
The server is NT4.0

Re: ODBR

Hanniff Tingling — Thu, 21 Feb 2002 10:41:39 GMT

Ivan

I think you should check the BIOS on the Adaptec Cards - make sure you have the latest BIOS on the; check Adaptec's website for latest BIOS info.

I would also consider clearing NetRAID BIOS info. (Ctrl>M) and rewrite then try again. I would even try changing the boot order of the drive to see what work!

I hope that help!!

Re: ODBR

Ivan Sum — Tue, 12 Mar 2002 05:59:42 GMT

I have verified that the drivers is already up-to-date.

Actually, the OBDR recover process is smooth except it pop-up an alert for failure in copying a ".yes" file when restoring up to 94%.

I have checked the file system, there is a file called yes._ under the ArcServe$\bootdisk directory. Does anything related to this file?

many thanks
Ivan.