topic Re: Support for CommandView 2.0 in Disk Enclosures

Support for CommandView 2.0

Chuck Ciesinski — Wed, 21 Sep 2005 16:04:06 GMT

To all,

Is HP still supporting CV-2.0 with 4.0 having been released? Is there a link on the HP ARRAY page with this info?

Really having a Monday...

Chuck

Re: Support for CommandView 2.0

Steven Clementi — Wed, 21 Sep 2005 17:09:41 GMT

Where/how are you using CV2.0? older CV's won't work with newer firmware, at least not properly. (assuming your talking about CV-EVA).

As for support, I doubt they even acknowledge it, but can't say for sure.

Steven

Re: Support for CommandView 2.0

Uwe Zessin — Thu, 22 Sep 2005 00:09:01 GMT

Highly unlikely. CV-EVA V2.1, for example, did come with SMA V2.0 Service Pack 2 and did support HSV100 - VCS2.003 and HSV110 - VCS2.002.

Re: Support for CommandView 2.0

florence mathon lermusi — Thu, 22 Sep 2005 05:37:41 GMT

Hi Chuck,

try : ftp://ftp.compaq.com/pub/products/sanworks/techdoc/managementappliance/SMASupportMatrixv1-3.pdf

Fl

Re: Support for CommandView 2.0

Devender Khatana — Thu, 22 Sep 2005 09:05:19 GMT

Hi,

For XP I think the latest version of command view in 2.1 only. Is not it ?

-Devender

Re: Support for CommandView 2.0

Chuck Ciesinski — Mon, 26 Sep 2005 13:14:35 GMT

To All,

Subsequent to the post, my datacenter team has advised me that both arrays are on 3.0. The link to the support page was VERY helpful. Thanks to all who replied.

Chuck

Re: Support for CommandView 2.0

Chuck Ciesinski — Mon, 26 Sep 2005 13:17:02 GMT

See my message about information from datacenter. We are 3.0 on both arrays.