topic Re: MODEL 20 PROBLEM in Disk Enclosures

MODEL 20 PROBLEM

SHANKU — Wed, 06 Feb 2002 07:31:54 GMT

I'm facing some problem with a HP model-20 (Nike) RAID Box. The box has 2 SPs and 2 LUNs are configured, one LUN assigned to each SP.
The problem I'm facing is, while working, suddenly the Raid Box gave microcode panic and both the LUNs are not accessible now. Instead of showing "Enabled" status, it shows "ready" status on both the LUNs in the Presentation Menu.
Also, if I select individual disks in the pesentation menu, it shows the status as "Bound. But Not Assigned".It shows no problem with the Raid LUNs configured. It seems like the Raid5 has gone off-line. Is there any way to bring it back to "Enabled" state without losing the data ( I have 90GB of data).
I have tried putting one SP controller at a time with auto-tresspass and Unit auto-assign enabled. But still same problem.

Regards,
SHANKU

Re: MODEL 20 PROBLEM

Vincent Farrugia — Wed, 06 Feb 2002 09:19:19 GMT

Hello,

Try to enter Gridmanager from the other SP. If you see both as ENA, then the other SP is faulty. In any case, call your HP representative for help on this issue.

HTH,
Vince

Re: MODEL 20 PROBLEM

K.Vijayaragavan. — Wed, 06 Feb 2002 13:08:49 GMT

Hi,

I think the diskarray 20 has lost only the RAID5 configuration from it's memory but the data should be there.

-Vijay