topic FC60: no arrays were found by the AM60Srvr in Disk Enclosures

FC60: no arrays were found by the AM60Srvr

Anthony_4 — Thu, 09 Nov 2000 04:33:01 GMT

It's a new installation. we have 2 FC card on V2250 connecting to FC60 with 2 SP.
After powerup, ioscan shows CLAIMED for the A5277A FC60 and diskinfo can also show configured LUN information. but amdsp -R/amdsp -i shows"no arrays were found by the AM60Srvr". therefore I cannot configure the FC60.
How can I correct this problem?
Tony

Re: FC60: no arrays were found by the AM60Srvr

Paul McCleary — Fri, 10 Nov 2000 11:57:42 GMT

Check that the ARMServer is running. Just do a ps -ef|grep on it. If not start it up and away you go.

HTH, Paul

Re: FC60: no arrays were found by the AM60Srvr

Frank Skibbe — Sat, 11 Nov 2000 17:42:10 GMT

Try to rescan the arrays with the amdsp -R
regards

Frank

Re: FC60: no arrays were found by the AM60Srvr

Insu Kim — Mon, 13 Nov 2000 04:19:51 GMT

Check that AM60Srvr is running.
If it's not, run it manually.
# /opt/hparray/bin/AM60Srvr
# amdsp -R

Now see AM60Srvr is running in the backgroung.
If it's there, It works.

Re: FC60: no arrays were found by the AM60Srvr

Bob Inglis — Tue, 14 Nov 2000 12:58:13 GMT

Make sure you have the latest AM60 server patch installed. There have been so many changes it is critical that the AM60server be the latest revision.