topic Re: autoraid 12H problem in Disk Enclosures

autoraid 12H problem

Lee Tae-kyung — Thu, 07 Feb 2002 08:53:53 GMT

The Disk of A3 slot is failed.
The disk of A3 slot had been failed ago...
I wonder if a Disk really problem.
Please help me...

Re: autoraid 12H problem

Mark van Hassel — Thu, 07 Feb 2002 09:42:53 GMT

Hi,

You could try to pull the disk out and then put the disk back in again. In the past HP has had some problems with the connectors. Also you could let an engineer check the connector in that disk slot if the disk in the same slot is failing over and over again.

Good Luck,

Mark

Re: autoraid 12H problem

Steve Labar — Thu, 07 Feb 2002 19:37:16 GMT

Try using command
arraylog -d {slot id} {array id}
this will give you specific information about the disk, including any error states.

Good Luck

Steve