topic Command View EVA - wrong date+time in Disk Enclosures

Command View EVA - wrong date+time

BrianDoyle — Wed, 07 Jun 2006 07:44:38 GMT

Hello,

On our EVA4000, the Date/Time for each vdisk created is incorrect by about 2 weeks.
Any idea how I can change the date/time for Command View ?Where does it get this value?

Rgds,
Brian

Re: Command View EVA - wrong date+time

Uwe Zessin — Wed, 07 Jun 2006 07:48:43 GMT

I doubt that you can change this afterwards if that was a question.

You can set up automatic time synchronization from the management server to the HSV controllers. On CV-EVA V5:
- select the storage system to display its properties
- hit the [System options] tab
- then the [Set time options] button
- select [/] Re-sync controller time with the SAN management time
- hit [Save changes]

Re: Command View EVA - wrong date+time

gurdeep_2 — Wed, 07 Jun 2006 10:10:10 GMT

You should also checkmark "Re-sync controller time with the SAN management time" option under System Options, Set System Time.
This way, it resynchs at multiple times throughout the day.
You cannot change the date created timestamp on a virtual disk, that is hardcoded when the disk is created.

Re: Command View EVA - wrong date+time

BrianDoyle — Wed, 07 Jun 2006 10:15:39 GMT

Thanks for your help guys.