https://community.hpe.com/t5/disk-enclosures/raid-4si-issue/m-p/5007348#M40404 Issue is with raid 4si card only.....Thanks Fri, 27 Oct 2006 05:04:48 GMT Sarjerao 2006-10-27T05:04:48Z https://community.hpe.com/t5/disk-enclosures/raid-4si-issue/m-p/5007346#M40402 Hello experts<BR />I replaced failed disk in raid 4si; but rebuild not started, still showing failed state on new disk. So I manualy done online to failed disk. This cause issue in data access in sap; though file system &amp; files inside ok. What could be wrong? Fri, 06 Oct 2006 15:38:25 GMT https://community.hpe.com/t5/disk-enclosures/raid-4si-issue/m-p/5007346#M40402 Sarjerao 2006-10-06T15:38:25Z https://community.hpe.com/t5/disk-enclosures/raid-4si-issue/m-p/5007347#M40403 Are you sure it was set up as RAID with redundancy before the failure ? Could also be that replacement disk is faulty or you have a faulty backplane. Wed, 11 Oct 2006 06:49:49 GMT https://community.hpe.com/t5/disk-enclosures/raid-4si-issue/m-p/5007347#M40403 Marc Carney 2006-10-11T06:49:49Z https://community.hpe.com/t5/disk-enclosures/raid-4si-issue/m-p/5007348#M40404 Issue is with raid 4si card only.....Thanks Fri, 27 Oct 2006 05:04:48 GMT https://community.hpe.com/t5/disk-enclosures/raid-4si-issue/m-p/5007348#M40404 Sarjerao 2006-10-27T05:04:48Z