https://community.hpe.com/t5/disk-enclosures/va7100-no-map/m-p/5037848#M40668 Dear Forum member<BR /><BR />I encountered problem on VA7100.<BR />The VA have 2 controllers and I think batteries have gone flat as the VA was off for sometime. C2 battery indicator blinking and C1 ok. When issued armdsp -f (array-id), it responses, everything listed is good except battery at C2. When issued armdsp -a (array-id), it responsed with msg "Status: Array status = Device is not ready" .Please advice. <BR />Best regards<BR />Alfred Keoy Mon, 02 Apr 2007 23:52:22 GMT alfred keoy 2007-04-02T23:52:22Z https://community.hpe.com/t5/disk-enclosures/va7100-no-map/m-p/5037848#M40668 Dear Forum member<BR /><BR />I encountered problem on VA7100.<BR />The VA have 2 controllers and I think batteries have gone flat as the VA was off for sometime. C2 battery indicator blinking and C1 ok. When issued armdsp -f (array-id), it responses, everything listed is good except battery at C2. When issued armdsp -a (array-id), it responsed with msg "Status: Array status = Device is not ready" .Please advice. <BR />Best regards<BR />Alfred Keoy Mon, 02 Apr 2007 23:52:22 GMT https://community.hpe.com/t5/disk-enclosures/va7100-no-map/m-p/5037848#M40668 alfred keoy 2007-04-02T23:52:22Z https://community.hpe.com/t5/disk-enclosures/va7100-no-map/m-p/5037849#M40669 Format the array as the last resort. Tue, 03 Apr 2007 21:51:40 GMT https://community.hpe.com/t5/disk-enclosures/va7100-no-map/m-p/5037849#M40669 alfred keoy 2007-04-03T21:51:40Z