topic Re: Rebuilding RAID array in SC10 in Disk Enclosures

Rebuilding RAID array in SC10

Pabs_1 — Wed, 06 Jun 2007 23:04:55 GMT

Hi all,

One of the disk in SC10 was crash, how to rebuild the array in RAID 5 after replacing the disk?

Thanks.

Pabs

Re: Rebuilding RAID array in SC10

Torsten. — Thu, 07 Jun 2007 01:56:16 GMT

Hi,

may I assume this jbod is connected to a raid4si controller and hp-ux is running?

If there is no hotspare configured, just replace the disk - that's it.

If you have a hotspare configured, it is now part of the RAID. You need to make the new disk the hotspare (using irm tool).

Re: Rebuilding RAID array in SC10

Pabs_1 — Fri, 06 Jul 2007 12:39:51 GMT

Thanks.

Pabs

Re: Rebuilding RAID array in SC10

Torsten. — Fri, 06 Jul 2007 14:02:09 GMT

You are welcome.

Remember to read this:

http://forums1.itrc.hp.com/service/forums/helptips.do?#33