topic Re: ACU-CLI for hpux in Disk Enclosures

ACU-CLI for hpux

jfsardon — Tue, 13 Nov 2007 14:14:40 GMT

Hi !
I'm installing a new msa1000 active/active on my hpux (rx6600) box with 2 hbas direct attachment.
Previously I create the raid group and the LUN from an Windows Box.

1) I can't see a msa line in the ioscan output
Any idea ?
2) Where can I download the MSA-CLI and ACU for hpux 11iv2 ? I saw nothing for hpux on the msa pages.

JF

Re: ACU-CLI for hpux

Andrew Rutter — Tue, 13 Nov 2007 14:57:45 GMT

hi,

you cannot downlaod the cli, this is built into the MSA1000 box. You access it through the serial port and can configure/view the storage and controllers here.

see this link for details of how to use it

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00683579/c00683579.pdf

I dont believe there is a ACU for hpux like there is for windows either.

once the luns are created you should see these in your ioscan output.

Andy

Re: ACU-CLI for hpux

jfsardon — Wed, 14 Nov 2007 10:25:29 GMT

OK, I use the built-in CLI.
Thanks

Re: ACU-CLI for hpux

christoph ernst_4 — Sun, 22 Jun 2008 13:52:29 GMT

CLI for HP-UX is available on the "hp StorageWorks modular Smart array 1500 cs Active/Active Support Software CD" which can be downloaded from the HP driver&software website.

christoph