https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085153#M41609 <BR />Exiting FE mode on a Nike 20 Array controller requires Control-P USER<BR /><BR />This is when the 'SP' controller is<BR />accessed via the serial port on the<BR />back of the unit.<BR /> Thu, 20 Dec 2007 20:08:04 GMT Ken Martin_3 2007-12-20T20:08:04Z https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085150#M41606 OK so I went into FE mode to check complete configuration and event logs of SP's...<BR /><BR />Had an SP that went into service mode (yellow led on) twice. Reseating the SP brought it back up.<BR /><BR />Now I can't remember how to exit FE mode.<BR /><BR />Any ideas?<BR /><BR />Thanks<BR /> Wed, 19 Dec 2007 22:26:07 GMT https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085150#M41606 Ken Martin_3 2007-12-19T22:26:07Z https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085151#M41607 Isn't it control P USER? Thu, 20 Dec 2007 01:21:49 GMT https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085151#M41607 gsb_2 2007-12-20T01:21:49Z https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085152#M41608 gsb is right.<BR />CTRL p USER (upper case) Thu, 20 Dec 2007 06:39:43 GMT https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085152#M41608 Torsten. 2007-12-20T06:39:43Z https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085153#M41609 <BR />Exiting FE mode on a Nike 20 Array controller requires Control-P USER<BR /><BR />This is when the 'SP' controller is<BR />accessed via the serial port on the<BR />back of the unit.<BR /> Thu, 20 Dec 2007 20:08:04 GMT https://community.hpe.com/t5/disk-enclosures/nike-20-array-sp-question/m-p/5085153#M41609 Ken Martin_3 2007-12-20T20:08:04Z