topic Secure path giving error "no SecurePath device found" in Disk Enclosures

Secure path giving error "no SecurePath device found"

ManojK_1 — Fri, 23 May 2008 14:20:56 GMT

Hi Friends,

I have recently upgraded secure path in our HP Unix servers which is connected to eva8000.

After restarting the server "autopath display" command is throwing an abnormal ouput like
"AUTOPATH : no SecurePath device found".

If i am doing a "autopath discover" command , after that "autopath display" command is giving proper output.

For every reboot "autopath display" is giving the same error. So after every reboot i am running "autopath discover command manually for getting the proper "autopath display" output.

Upgraded secure path version is A.3.0F.02F.02F
(version 3 sp2 patchset2)

How can i fix this issue?

If i am

Re: Secure path giving error "no SecurePath device found"

Duncan Edmonstone — Fri, 23 May 2008 14:42:17 GMT

Well in the first instance go to service pack 3 - see if that fixes your issue:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=471465&prodNameId=1825336&swEnvOID=7&swLang=8&mode=2&taskId=135&swItem=co-58128-1

HTH

Duncan

Re: Secure path giving error "no SecurePath device found"

ManojK_1 — Sun, 25 May 2008 03:51:16 GMT

Hi Duncon,

Thanks for your information. I have downloaded secure path 3 service pack 3. But not able to apply as the servers are in production environment and it is online.

Once i will get a downtime i will do that and will give you the feed back.

Also i noticed that while server boots it is giving a message that autopath discover is not set. How i can enable autopath discover to run automatically when the server starts.

Thanks and Regards,
Manoj K
Server Application Support
Bank Muscat-IT
Ruwi ,Sultanate Of Oman
Phone: +968 24768557

Over one million satisfied customers by 2010 through continuous enhancement of stakeholder value.

Re: Secure path giving error "no SecurePath device found"

Duncan Edmonstone — Sun, 25 May 2008 06:31:36 GMT

When you run "autopath display" immediately after the reboot what is the status of "Auto Discover"? Is it set to ON?

If not you can turn on auto-discovery using:

autopath discover on

see p87 of the manual:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01403983/c01403983.pdf

HTH

Duncan

Re: Secure path giving error "no SecurePath device found"

ManojK_1 — Mon, 26 May 2008 03:52:21 GMT

Thanks duncan,

I got the solution.

Manoj K