https://community.hpe.com/t5/disk-enclosures/commandview-sdm/m-p/5111345#M41950 Yes you can. The CV-SDM is not a driver, it is the array management software. Thu, 29 May 2008 16:52:11 GMT TTr 2008-05-29T16:52:11Z https://community.hpe.com/t5/disk-enclosures/commandview-sdm/m-p/5111344#M41949 I have a VA7410 disk array that is managed with CV SDM. It is my understanding that I can remove the CV SDM software and not impact the ability to still see the LUNS and access the data. Of course I will no longer be able to manage the array, but that will not be an issue, since once the data is migrated off of it, it will be retired. So, can I remove the CV SDM software and still access the present LUNs/data? Thu, 29 May 2008 16:25:05 GMT https://community.hpe.com/t5/disk-enclosures/commandview-sdm/m-p/5111344#M41949 placitasmd 2008-05-29T16:25:05Z https://community.hpe.com/t5/disk-enclosures/commandview-sdm/m-p/5111345#M41950 Yes you can. The CV-SDM is not a driver, it is the array management software. Thu, 29 May 2008 16:52:11 GMT https://community.hpe.com/t5/disk-enclosures/commandview-sdm/m-p/5111345#M41950 TTr 2008-05-29T16:52:11Z https://community.hpe.com/t5/disk-enclosures/commandview-sdm/m-p/5111346#M41951 Thanks for confirming my suspicions.. Fri, 30 May 2008 02:24:59 GMT https://community.hpe.com/t5/disk-enclosures/commandview-sdm/m-p/5111346#M41951 placitasmd 2008-05-30T02:24:59Z