https://community.hpe.com/t5/disk-enclosures/expand-logical-drive/m-p/2670700#M4197 The only solution you could do is to make a volume set by taking the existing D drive and adding the free space. THis is to be done within Windows 2000 under Disk Management. If you need help with this we suggest you run a search on Microsoft's web site for instructions. Compaq strongly recommends backing the data from the D drive, deleting this partition, creating a new D partition using all of the free space and restoring from backup. Thu, 28 Feb 2002 00:00:00 GMT Mark Cloutier 2002-02-28T00:00:00Z https://community.hpe.com/t5/disk-enclosures/expand-logical-drive/m-p/2670699#M4196 I have a 5300 with 1 logical drive 2 partitions C 4gb D 251gb I added more drives to the array and expand the array I now have 90 gb free I can create a new logical drive but I would like to add this space to the D partition I the CPQ array software can not do this under Win 2k> Does anyone have any ideas on the best way to do this I would like to avoid doing a backup and restore . Mon, 25 Feb 2002 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/expand-logical-drive/m-p/2670699#M4196 Ayman Altounji 2002-02-25T00:00:00Z https://community.hpe.com/t5/disk-enclosures/expand-logical-drive/m-p/2670700#M4197 The only solution you could do is to make a volume set by taking the existing D drive and adding the free space. THis is to be done within Windows 2000 under Disk Management. If you need help with this we suggest you run a search on Microsoft's web site for instructions. Compaq strongly recommends backing the data from the D drive, deleting this partition, creating a new D partition using all of the free space and restoring from backup. Thu, 28 Feb 2002 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/expand-logical-drive/m-p/2670700#M4197 Mark Cloutier 2002-02-28T00:00:00Z