https://community.hpe.com/t5/disk-enclosures/install/m-p/2671475#M4213 We're setting up two 18gb drives on a 431 controller in a Compaq 1600 server and will be moving the drives and controller to an ML350. This will replace the existing drives and controller in the server. Apart from making sure the frimware is up to date, anything else we should be aware of? <BR /> <BR />Thanks Tue, 26 Feb 2002 00:00:00 GMT Ayman Altounji 2002-02-26T00:00:00Z https://community.hpe.com/t5/disk-enclosures/install/m-p/2671475#M4213 We're setting up two 18gb drives on a 431 controller in a Compaq 1600 server and will be moving the drives and controller to an ML350. This will replace the existing drives and controller in the server. Apart from making sure the frimware is up to date, anything else we should be aware of? <BR /> <BR />Thanks Tue, 26 Feb 2002 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/install/m-p/2671475#M4213 Ayman Altounji 2002-02-26T00:00:00Z https://community.hpe.com/t5/disk-enclosures/install/m-p/2671476#M4214 There is nothing that needs to be done. You might want to go into the BIOS and set the boot order. Tue, 26 Feb 2002 00:00:01 GMT https://community.hpe.com/t5/disk-enclosures/install/m-p/2671476#M4214 Mark Cloutier 2002-02-26T00:00:01Z