topic LUN configuration manager xp question? in Disk Enclosures

LUN configuration manager xp question?

rainman du — Tue, 26 Feb 2002 01:20:17 GMT

There are the SCSI path list:
*****************************
port SCSI ID CU:LDEV ......
1A F 0:00
*****************************
why the SCSI ID is F?
Can I config it another SCSI ID?
Thanks

Re: LUN configuration manager xp question?

Hanniff Tingling — Tue, 26 Feb 2002 03:28:03 GMT

Here is a link with some manuals on the autoRAID 12c that will help.

Provide a feedback if you need anymore help.

http://www.hp.com/cposupport/manindex/hpsurestor19162_eng_man.html

Re: LUN configuration manager xp question?

Hanniff Tingling — Tue, 26 Feb 2002 05:10:30 GMT

rainman

you need to submit more information; SCSI-ID are generally SET on the hardware side; and usually are changed by DIP switches or the HDD or on the controller or depends on the BUS topology etc.

Provide mode infomation;

Re: LUN configuration manager xp question?

Enes Dizdarevic — Wed, 27 Feb 2002 08:30:16 GMT

This is from CommandView XP Users Guide (Chapter 7 LUN Configuration Manager):

SCSI ID:
If the SCSI radio button is selected, displays all of the allowed values for SCSI IDs.
If Fibre is selected, the SCSI ID box displays only one (F) SCSI ID.

This manual can be found at http://www.hp.com/cposupport/manindex/hpsurestor64859_eng_man.html

Re: LUN configuration manager xp question?

Tom Moore — Sat, 09 Mar 2002 00:09:11 GMT

Rainman,

The SCSI ID is always set to 15 on Fibre Channel connections. The LUN ranges go from 0x00 to 0xff per port.

This your original post decodes appropriately:

*****************************
port SCSI ID CU:LDEV ......
1A F 0:00

Port = 1A
SCSI ID = 15 (normal for FC attach)
CU:LDEV - Volume 0:00

I notice there's no LUN number reported. Has it been assigned yet?

Cheers,
Tom

Re: LUN configuration manager xp question?

Insu Kim — Sat, 09 Mar 2002 09:35:28 GMT

Tom is right!
In the case of Fiber Channel, Only SCSI ID "F" will be used so only SCSI ID "F" is displayed in the LUN configuration menu.

Hope this helps,