topic Re: EVA 4400 Returns a status code 22 and 83 in Disk Enclosures

EVA 4400 Returns a status code 22 and 83

Stefano Meroni — Tue, 25 Nov 2008 15:36:13 GMT

Hello.
We're trying to change the IP address of the anagement port to an EVA4000 but we got this errors info...

Error updating Management Module configuration data on the Storage Cell.
Status code: 22

Error updating Management Module configuration data on the Storage Cell.
Status code: 83

Any way, where we can found the EVA 4000 Error codes reference? We surfed a lot without success.

thankyou

Stefano

Re: EVA 4400 Returns a status code 22 and 83

Víctor Cespón — Tue, 25 Nov 2008 15:49:34 GMT

Try to press the reset button on the management module 5 seconds, this should reset the IP to 192.168.0.1

Update controllers and management module to latest firmware. I have seen cases where this solved the issue

The IP cannot be of the range 10.XXX.XXX.XXX

Re: EVA 4400 Returns a status code 22 and 83

Stefano Meroni — Tue, 25 Nov 2008 17:55:51 GMT

Hi,
it seems to be a non correct configuration of the two fabric switches becouse connecting directly to the eva from the server all goes ok.

We enabled the ports on the switches but we still need to perform some points I suppose.

Can you redirect us to the correct topic?

Thankyou in advance!

Stefano

Re: EVA 4400 Returns a status code 22 and 83

Stefano Meroni — Wed, 26 Nov 2008 12:57:47 GMT

Ok, we managed in configuring the fabric switch too.

Thankyou

Re: EVA 4400 Returns a status code 22 and 83

Stefano Meroni — Wed, 26 Nov 2008 12:59:08 GMT

After performing a new switches configuration all worked good!

Stefano