topic Re: Logs capturing from CLI in MSA2000 in Disk Enclosures

Logs capturing from CLI in MSA2000

B.K — Thu, 25 Dec 2008 03:41:43 GMT

Hi,

Is there a single command to capture the logs of MSA2000 from CLI. The same logs which we get from SMU.

I checked there are couple of command like show events, configuration and all. But I need to know about single command.

Thanks in advance
Bhavnish

Re: Logs capturing from CLI in MSA2000

Dileep.. — Thu, 25 Dec 2008 17:01:36 GMT

Below command should give some information.

show tech_support

Re: Logs capturing from CLI in MSA2000

Uwe Zessin — Thu, 25 Dec 2008 18:10:26 GMT

Yes, if you enter it on an MSA1000 CLI ;-)

Re: Logs capturing from CLI in MSA2000

Diego Castelli — Tue, 30 Dec 2008 11:46:02 GMT

show debug-log all

hope this helps

P.S. you can find the CLI reference guide here:
http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=3687115&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc01505833%2Fc01505833.pdf

Goodbye!
Diego.

Re: Logs capturing from CLI in MSA2000

B.K — Fri, 31 Jul 2009 09:50:05 GMT

Thanks

Re: Logs capturing from CLI in MSA2000

Diego Castelli — Fri, 31 Jul 2009 09:53:57 GMT

If i was correct, please submit points.
This will help people continuing posting here solutions and others with similar problems to identify answers quickly.

Thanks.