topic Re: Management Module (WOCP) EVA4400 in Disk Enclosures

Management Module (WOCP) EVA4400

JuanCG — Sun, 10 May 2009 16:27:35 GMT

Hello everyone, I have an EVA4400 with WOCP when I connect to WOCP just makes me more details of the EVA will not let me create vdisk or add host or anything.

The version you have is the one that comes from the factory.

Since the WOCP can manage all the features of the EVA (create vdisk, add host ...)?

Thank you

Re: Management Module (WOCP) EVA4400

Patrick Terlisten — Sun, 10 May 2009 16:34:13 GMT

Hello Juan,

you need Command View to manager your EVA. Currently there are two different ways:

1. Install CV on a windows server and manage you EVA with this CV installation.

2. You update your EVA to XCS 095000000. Then you can use CV 9.0 installed on the controller to manage you EVA. This is only supported with EVA4400.

Best regards,
Patrick

Re: Management Module (WOCP) EVA4400

JuanCG — Sun, 10 May 2009 16:41:56 GMT

Hi Patrick,

If I upgrade to the EVA XCS 095000000, then I can fully manage the EVA from WOCP?

The CD came with the EVA Smart Start for EVA 2.1, which comes with the CV8, the update is free or must pay a license for more CV9?

Patrick thank you very much

Re: Management Module (WOCP) EVA4400

Patrick Terlisten — Sun, 10 May 2009 17:46:04 GMT

Hello,

first you need a functional CV server to update XCS. Try to setup it on a windows server with a FC-HBA. You can download CV9 here:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=CommandViewEVA9.0.1

Best regards,
Patrick

Re: Management Module (WOCP) EVA4400

JuanCG — Sun, 10 May 2009 18:22:25 GMT

Many Graicas Patrick!!
;-)

Re: Management Module (WOCP) EVA4400

Patrick Terlisten — Sun, 10 May 2009 18:37:18 GMT

Hello,

don't forget to assign points. ;)

Best regards,
Patrick

Re: Management Module (WOCP) EVA4400

Cass Witkowski — Mon, 11 May 2009 21:09:14 GMT

You will want to make sure you upgrade to the latest version of firmware for the EVA to fix problems with 9500000