topic Re: adjust temperature warning for EVA in Disk Enclosures

adjust temperature warning for EVA

Athome — Mon, 22 Jun 2009 06:35:35 GMT

Hi!
is it possible to adjust the temperature warning-level for the eva? we would like to set it abit lower.

I see that in CV > System Options > Configure Event notification > 31142: SC Event Code: 090e3605 - The temperature trip point for a temperature sensor located within an HSV200 controller has been reached.
Is selected but underneath is another(not selected):

31143 SC Event Code: 090f2e05 - The temperature within an HSV200 controller is approaching its trip point.

What temps is those set to? and can I change them?

Re: adjust temperature warning for EVA

Mark... — Tue, 23 Jun 2009 12:39:35 GMT

Hi,
To the best of my knowledge you are NOT able to alter/modify/change any temp thresholds for anything on an EVA.
To view your settings for the ctrl then navigate down to "hardare" then "rack" the "controller encl x" then "controller a or b" then tab "enclosure". You will find the info there.
Mark...

Re: adjust temperature warning for EVA

sreekanthtm — Tue, 23 Jun 2009 13:16:15 GMT

Hi,

>>>is it possible to adjust the temperature warning-level for the eva? we would like to set it abit lower.

No, In EVA there is no option to change the temperature threshold value.
See the Threshold values and sensor location attached.

Rgds,
Sreekanth.

Re: adjust temperature warning for EVA

Athome — Tue, 23 Jun 2009 14:07:58 GMT

ok, Thanks for reply