https://community.hpe.com/t5/disk-enclosures/va7100-disk-drive-replacement/m-p/5194528#M43322 I have a drive that failed on my VA7100. I have a replacement disk and I assume that I can just pull the bad one out, wait a couple of minutes and put the new one in.<BR /><BR />Is my assumption correct or is there more to it?<BR /><BR />Any help would be greatly appreciated!<BR /><BR />Thanks,<BR />Tim Thu, 20 Aug 2009 14:51:34 GMT Timothy P. Jackson 2009-08-20T14:51:34Z https://community.hpe.com/t5/disk-enclosures/va7100-disk-drive-replacement/m-p/5194528#M43322 I have a drive that failed on my VA7100. I have a replacement disk and I assume that I can just pull the bad one out, wait a couple of minutes and put the new one in.<BR /><BR />Is my assumption correct or is there more to it?<BR /><BR />Any help would be greatly appreciated!<BR /><BR />Thanks,<BR />Tim Thu, 20 Aug 2009 14:51:34 GMT https://community.hpe.com/t5/disk-enclosures/va7100-disk-drive-replacement/m-p/5194528#M43322 Timothy P. Jackson 2009-08-20T14:51:34Z https://community.hpe.com/t5/disk-enclosures/va7100-disk-drive-replacement/m-p/5194529#M43323 You should wait until the rebuild is finished before replacing the disk. Thu, 20 Aug 2009 17:55:57 GMT https://community.hpe.com/t5/disk-enclosures/va7100-disk-drive-replacement/m-p/5194529#M43323 Torsten. 2009-08-20T17:55:57Z https://community.hpe.com/t5/disk-enclosures/va7100-disk-drive-replacement/m-p/5194530#M43324 Thanks Torsten!<BR /><BR />The rebuild has already finished, I will probably replace the drive tonight.<BR /><BR /><BR />Tim Thu, 20 Aug 2009 19:23:44 GMT https://community.hpe.com/t5/disk-enclosures/va7100-disk-drive-replacement/m-p/5194530#M43324 Timothy P. Jackson 2009-08-20T19:23:44Z